china mold maker,injection mold china,plastic mold china,china mold company

Stamped identification number criterion on the plastic injection mold

Home » Mold Making Blog » Stamped identification number criterion on the plastic injection mold

Stamped identification number criterion on the plastic injection mold

1.  Each plate must have the number “0-0” stamped on the datum corner. Each plate also must be numbered as defined mold manufacture job number and identified number.

2.  Each waterline is to be identified on each end of the circuit with a number such as “In 1 – Out 1” in compliance with the waterline sketch.

3.  Each gas track is to be identified on each end of the circuit with a number such as “Air In 1 ” in compliance with the gas track sketch.

4.  Each oil track is to be identified on each end of the circuit with a number such as “Oil In 1 ” in compliance with the oil line sketch.

5.  Each eyebolt must be stamped size number.

6.  “UP” and the arrow must be stamped on the stack block of the operator side is to be identified top direction of the mold.

pasticmoldmakerinchina

7.  Each component must have a number as same as item number in BOM.

injectionmoldchina

8.  All ejector pins and ejector plate of plastic injection mold should be numbered for ease of assemble.

chinaplasticmold

9.  All components of the plastic injection mold (Cavity, Core, Slide, Lifter, Inserts, Wear Plate and Gib etc) should be stamped component identified number, part name, material and hardness (No position to be marked except smaller insert) as same as BOM data.

chinamoldmaker

Related Items

  • Mold Making Show

  • Contact Us

  • Why Us?

    MSC is dedicated to helping our customers become leaders in their respective fields. From concept to design, MSC builds and repairs molds in a full range of sizes and complexity.

    Customer network covers in Europe, America, Holland, etc, across the world.

    We always provide the low factory price for you!

  • Tags